Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Reseda, CA
A Level 2 chimney inspection with camera scan and sweep in Reseda typically runs $199-$289 for standard masonry fireplaces, with cap and crown work starting around $450 and liner replacement ranging $2,800-$4,500 depending on flue configuration. We’re Level Two Chimney Co., and we dispatch crews to Reseda from our Los Angeles office daily. Call (424) 414-6048 for a written estimate before any work begins.
Reseda’s 1950s-1970s tract housing stock and its position directly above the 1994 Northridge earthquake epicenter create chimney problems you won’t find at the same rate in neighboring Valley cities. Original clay-tile flue liners, brittle from age and seismic stress, fail alongside crowns that were damaged or removed during post-quake repairs and never properly replaced. Our Chimney Cap & Crown and Chimney Liner & Rebuild work is built around those conditions.
Why Reseda Homes Are Different
Reseda sits in the San Fernando Valley’s thermal basin, where summer temperatures routinely hit 100°F and winter fireplace use is concentrated into brief, intense periods. That pattern deposits stage-one and stage-two creosote in flues that sit dormant ten months a year, then fires up hard in December and January. The Valley’s Santa Ana wind events push dry leaves, debris, and nesting material straight down open flues.
The housing stock tells the bigger story. Most Reseda homes went up between 1955 and 1975 as standard tract construction, clay-tile flue liners and all. Those liners are now 50-70 years old, well past typical service life, and many took structural hits during the January 17, 1994 Northridge earthquake whose epicenter lay almost directly beneath the neighborhood. We’ve found unrepaired hairline cracks, shifted fireboxes, and spalled mortar joints that were cosmetically patched and forgotten. Post-seismic damage assessment is standard on every Reseda inspection we perform.
It’s worth checking before the first winter fire.
Our Main Reseda Services
These are the three services Reseda homeowners call us about most often.
Chimney Cleaning & Sweep in Reseda
We perform NFPA 211 Level 2 inspections with camera scan on every sweep, documenting creosote class, liner condition, and any post-seismic damage in your Reseda home’s chimney. Our crews carry rotary cleaning systems sized for the Valley’s standard masonry flues. Chimney Cleaning & Sweep in Reseda

Chimney Repair in Reseda
From earthquake-compromised fireboxes to spalled brick and deteriorated mortar joints, we repair structural damage with materials matched to your home’s original construction. Every repair quote includes photo documentation of the damage and a written scope of work. Chimney Repair in Reseda

Fireplace Services in Reseda
Gas log sets, inserts, and damper repairs for Reseda’s original masonry fireplaces and retrofitted units. We inspect smoke chamber integrity and draft performance, critical in older Valley homes where framing settlement after 1994 can alter chimney geometry. Fireplace Services in Reseda

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Reseda

Reseda’s combination of Santa Ana wind exposure, intense summer heat cycling, and the post-1994 pattern of missing or damaged caps makes cap and crown work our most frequent repair call here. Original concrete crowns on 1960s and 1970s tract homes have cracked and spalled; caps that should have been replaced after the earthquake never were, leaving flues open to debris and moisture that accelerates liner deterioration. Our Chimney Cap & Crown service addresses both the protection gap and the underlying crown damage.
Cap Replacement
Signs you need it
Your flue is open to the sky, the existing cap is rusted through or missing entirely, or you’ve found bird nesting material or Valley debris in the firebox.
What it costs in Reseda
Standard single-flue cap replacement in Reseda runs $450-$750 installed; multi-flue caps or custom sizes with wind-rated strapping range $650-$1,200.
How we do it
We measure your flue tile or liner opening, fabricate or source a stainless steel or copper cap through our Haven buying network, and secure it with earthquake-rated strapping appropriate to Reseda’s seismic zone.
Crown Repair
Signs you need it
Visible cracks in the concrete crown surface, water staining on interior firebox walls, or pieces of concrete spalling off the crown edge.
What it costs in Reseda
Crown crack repair with flexible waterproof coating in Reseda typically costs $850-$1,400; partial crown rebuilds run $1,500-$2,500.
How we do it
We grind out cracked concrete, apply a bonding layer, and pour new crown material sloped to shed water, then seal with a breathable membrane rated for Valley thermal cycling.
What Chimney Cap & Crown Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Single-flue cap replacement | $450 - $750 |
| Multi-flue cap installation | $650 - $1,200 |
| Crown crack repair and coating | $850 - $1,400 |
| Partial crown rebuild | $1,500 - $2,500 |
Do I need a cap if my flue is already lined?
Yes. The liner protects the flue walls, but the cap keeps water, debris, and nesting birds out of the liner top and crown surface. In Reseda, an open flue collects Santa Ana debris within a single season.
Can a cracked crown wait until next year?
Small surface cracks can be sealed; cracks that let water reach the chimney structure accelerate freeze-thaw damage and should be addressed before winter. We document crown condition with camera photos so you can see the difference.
Chimney Liner & Rebuild in Reseda

Reseda’s 50-70-year-old clay-tile flue liners are at or past service life, brittle from decades of thermal cycling and often cracked from the 1994 Northridge earthquake. When tiles flake, spall, or shift, they create gaps that let heat and combustion gases reach surrounding framing, a condition NFPA 211 classifies as a hazard requiring repair or replacement. Our Chimney Liner & Rebuild work starts with a camera scan that shows you exactly what condition your liner is in.
Stainless Steel Liner
Signs you need it
Clay tile pieces in the firebox, visible cracks in the flue wall on camera inspection, or a Level 2 report documenting gaps between tile joints.
What it costs in Reseda
Stainless steel liner installation for a standard Reseda masonry fireplace runs $2,800-$4,500; multi-story or offset flues range $4,000-$6,500.
How we do it
We measure the flue with a video scan, source a UL-listed flexible or rigid stainless liner from DuraFlex or Olympia Chimney, and install it with proper top and bottom termination.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, a leaning or separated chimney stack, or mortar joints eroded to the point of structural compromise.
What it costs in Reseda
Partial rebuild of the upper chimney stack in Reseda typically ranges $3,500-$7,000 depending on height and scaffolding requirements.
How we do it
We dismantle damaged courses to sound masonry, rebuild with matching brick and type-N or type-S mortar, and install proper flashing and a new crown before capping.
What Chimney Liner & Rebuild Costs in Reseda
| Item | Typical range in Reseda |
|---|---|
| Stainless steel liner (standard flue) | $2,800 - $4,500 |
| Stainless steel liner (multi-story/offset) | $4,000 - $6,500 |
| Partial chimney rebuild | $3,500 - $7,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Can I just patch cracked clay tiles instead of replacing the liner?
Individual tile replacement is rarely practical; new tiles won’t bond to old, and the surrounding tiles are usually similarly compromised. A stainless steel liner is the standard repair and carries a manufacturer warranty.
How long does a liner installation take?
Most standard Reseda liner installations are completed in one day; multi-story or offset flues may require a second day for proper connection and testing.
Brands We Service in Reseda
We source caps, liners, and repair materials through our Haven buying network from Gelco, Olympia Chimney, Famco, and Copperfield, keeping parts available for Reseda jobs without extended wait times. Most cap and liner orders arrive within two business days. our brands
Pricing for Chimney Cleaning in Reseda, CA

| Service | Typical range in Reseda |
|---|---|
| Level 2 sweep and inspection | $199 - $289 |
| Single-flue cap replacement | $450 - $750 |
| Multi-flue cap installation | $650 - $1,200 |
| Crown crack repair and coating | $850 - $1,400 |
| Partial crown rebuild | $1,500 - $2,500 |
| Stainless steel liner (standard flue) | $2,800 - $4,500 |
| Stainless steel liner (multi-story/offset) | $4,000 - $6,500 |
| Partial chimney rebuild | $3,500 - $7,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Prices in Reseda can run toward the higher end when earthquake damage requires structural repair before liner or cap work can proceed, or when scaffolding is needed for two-story Valley tract homes. Every job gets a written price, written scope, and written warranty before work starts, Clause 1 of the Haven Standard.
Neighborhoods We Serve in Reseda
Our crews work throughout Reseda’s established neighborhoods, from the original postwar tracts near Reseda Boulevard to the split-level homes of the 1960s and 1970s south of Sherman Way. Scheduling is typically available within a few business days, with dispatch coordinated from our Los Angeles office.
- Reseda Ranch
- North of Sherman Way
- West of Reseda Boulevard
- East of Corbin Avenue
- South of Saticoy Street
Service Area - Cities Near Reseda

We serve Reseda homeowners directly and regularly work in neighboring Valley communities. If you’re just outside Reseda city limits, we also dispatch to Tarzana, CA, Northridge, CA, Sherman Oaks, CA, and Van Nuys, CA. The same Level 2 inspection standard, written pricing, and documented photo record apply in every service area.
Serving Reseda, CA - Our Local Coverage Area
We’re based in the Reseda area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Reseda

Most chimney repairs and liner replacements in Los Angeles County require a permit; cap replacement typically does not. We handle permit documentation as part of our scope when required, and we note permit status in your written estimate so there are no surprises.
We typically book Reseda appointments within 3-5 business days during shoulder seasons, with some flexibility for urgent safety concerns. Call (424) 414-6048 and we’ll confirm the next available slot.
Yes, we work with Reseda HOA properties and coordinate access as needed. Some HOAs require pre-approval for exterior scaffolding or roof access; we provide the documentation your board needs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Reseda Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.





Before
After
Before
After
Before
After